buy Combined Machine

Всё о пейтбольном оборудовании.

buy Combined Machine

Сообщение astao82 16 сен 2019, 07:56

CNC Punch-Shear Combined FMS
The unit under this document consists of the independent CNC turret punch machine, CNC hydraulic right angle shear, sorting device, outlet device, feeding table together with positioning table, CNC system and controlling cabinet.

I?Main Technique Specification
a?CNC Turret Punch Machine
No.SpecificationUnitMachine Model
MT200D
1Punch ForcekN200
2Main Driving Type/Single-motor driven
3CNC System/BECKHOFF
4Max. Sheet Processing Sizemm1250×2500
5No. of Clamp 3(Intelligent clamps)
6Max. Thickness of Platemm3.2
7Max. Punching DiametermmF88.9
8Main Cylinder Strokemm32
9Max. Punch Hit at 1mm pacehpm1000
10Max. Punch Hot at 25mm Pacehpm500
11Max. Nibbling Speedhpm1500
12No. of Stationsno.32
13No. of Auto-Indexno.2
14No. of Controlling Axisno.6(X?Y1?Y2?V?T?C)
15Tooling Type/Long type
16Worktable Type/full brush table
17Max. Feeding SpeedXm/min120
Y90
XY150
18Speed of Turretrpm30
19Rotating Speed of Auto-Indexrpm60
20Accuracy of Adjacent Holesmm±0.1
21Main Motor PowerkVA30
22Air PressureMPa0.55
23Gas ConsumptionL/ min250
24Clamp dead zone detection/Y
25Sheet-anti-stripping Switch/Y
26Vacuum slug/Y
27CNC Memory Capacity/500GB
28Outline Dimensionmm5620×5690×2350
bRight Angle Shear
1Max. Thickness of PlateAl:5mm / Fe:4mm/ Stainless Steel:3mm
2Min. Thickness of Plate0.8mm
3Clearance between BladesAdjustable
4Length of BladeX:800mm(Half Shear is available) Y:1250mm
cSorting unit
1Maximum size of componentsX:500mm Y:500mm
2 Minimum size of componentsX:100mm Y:100mm
3Conveying speed40m/minbuy Combined Machine
website:http://www.jfymachine.com/combined-machine-1
astao82
Ефрейтор
Ефрейтор


Сообщения: 10
Зарегистрирован: 16 сен 2019, 07:55





Вернуться в Оборудование

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 5

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group